Fluke 1630-2 FC: Stake less earth ground loop and AC leakage current clamp for fast, safe indoor/outdoor earth ground resistance and AC leakage current tests. For use to test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not allow driving auxiliary test stakes. Remain on line – this earth ground clam meter identifies ground loop resistance without having to disconnect then reconnect the earth electrode from the system. Additionally, this clamp meter is a rugged tool that comes equipped with a heavy-duty clamp jaw which stays in alignment and calibration even in every day, on-the-job industrial environments. Fluke 1630-2 FC Specifications Electrical Specifications Maximum Voltage to Earth Ground 1000 V Frequency Range 40 Hz to 1 kHz Overload Indication OL Data Logging Capacity Minimum of 32,760 measurements Data Logging Interval 1 second to 59 minutes and 59 seconds Display Reading Specification with Standard Loop Resistance Input (Ω) 0.474 0.5 10 100 Minimum 0.417 0.443 9.55 96 Maximum 0.531 0.558 10.45 104 Safety General IEC/EN 61010-1: Pollution Degree 2 IEC/EN 61557-1 Measurement IEC/EN 61010-2-032: CAT IV 600 V / CAT III 1000 V Current Clamp for Leakage Current Measurements IEC/EN 61557-13: Class 2, ≤30 A/m Resistance to Earth IEC/EN 61557-5 Effectiveness of the Protective Measures IEC/EN 61557-16 Electromagnetic Compatibility (EMC) International: IEC/EN 61326-1: Portable Electromagnetic Environment CISPR 11: Group 1, Class B, IEC/EN 61326-2-2 Korea (KCC): Class A equipment (Industrial broadcast and communications equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103 Wireless Radio Frequency Range 2412 to 2462 MHz Output Power <10 mW Radio Frequency Certification FCC ID:T68-FBLE IC:6627A-FBLE General Specifications Battery Type: 4 x AA Alkaline batteries (IEC/EN LR6) Life: More than 15 hours Ingress Protection IEC/EN 60529: IP30 with jaw closed LCD Digital reading: 9999 counts Refresh rate: 4 per second Operating Temperature 14 to 122°F (-10 to 50°C) Storage Temperature 4 to 140°F (-20 to 60°C) Operating Humidity Non condensing (<50°F) (<10 °C) ≤90% RH (at 50 to 86°F [10 to 30°C]) ≤75% RH (at 86 to 104°F [30 to 40°C]) ≤45% RH (at 104 to 122°F [40 to 50°C]) Reference Temperature 73 ±9°F (23 ±5°C) Temperature Coefficient 0.15% x (specified accuracy)/°C (<64.4 or >82.4°F [<18 or >28°C]) Operating Altitude 6561′ (2000 m) Storage Altitude 39,370′ (12,000 m) Dimensions 11.1 x 4.1 x 1.9″ (283 x 105 x 48 mm) Weight 1.94 lbs (880 g)
